Measure the space you will actually use
Start with the largest vehicle you expect to park, including mirrors, roof racks and accessories. Allow room to open doors, move around the vehicle and reach the house without squeezing between a post and a wall. Consider the approach from the street and the way you reverse or turn.
For two vehicles, sketch them both with their doors open. If a trailer, boat or mobility equipment needs access, add that to the brief now. Roof coverage, clear height and the spacing between posts are different measurements; check each on a proposed design.
Understand the exemption before ordering
Ground-level carports up to 20 m² can qualify for a building-consent exemption. For more than 20 m² and up to 40 m², the LBP pathway requires the specified design and construction work to be carried out or supervised by an LBP. A separate route uses an engineer’s design or design review and work built to it. These are conditional pathways, not a promise for every kit or location.
MBIE measures net floor area inside the enclosing posts or walls. At least one side must stay open to the outdoors for it to be a carport. Future enclosure as a garage needs a fresh assessment of the proposed work.
Check the site as well as the structure
Auckland planning rules, coverage, boundaries and access can affect the location. Near a boundary, fire separation also needs attention. Supply relevant property information and identify any known services where foundations may go. A supplier’s engineering document does not resolve all site questions.
Decide between a freestanding structure and an attachment to the house using the actual support and junction details. The house connection needs to carry loads and manage water. Existing concrete also needs to be suitable for the specified fixings; its tidy appearance alone is not evidence of foundation capacity.
Include the roof-water route
Plan where water will be collected and discharged. Gutters and a downpipe in a kit do not automatically provide the final property connection. MBIE requires compliant stormwater disposal, and new drains must be laid by an authorised drainlayer.
Point out current ponding, driveway slopes and existing downpipes at the visit. Keep the drainage work visible in the written scope so it is not discovered after the roof is installed. Paving and surrounding levels should be considered at the same time.
Compare the installed scope
Our carport allowance is for a basic installed structure on a suitable site. It excludes concrete or paving, drainage connections, major excavation, special foundations, electrical work, professional fees and approvals. Compare quotes on those inclusions, not only the roof dimensions.
If you are supplying a kit, provide its exact model and documentation before purchase where possible. Confirm who checks delivery, missing parts and supplier requirements. Caleb then agrees the construction scope, programme and access arrangements with you. The $75 planning visit is separate from the installation price.
Common questions
Do I need building consent for a carport?
A ground-level carport up to 20 m² may qualify for an exemption. Over 20 m² and up to 40 m², separate exemptions require the specified LBP involvement or engineer-designed/reviewed work. All conditions still matter. Read the carport consent and planning guide.
Can I build a carport near my boundary?
There is no single setback that fits every Auckland property. Check the zone’s planning controls, coverage, access and any title restrictions. Fire separation can also matter near a boundary. A building-consent exemption does not remove these checks. Plan the position before buying a kit.
How do I choose the size of a single or double carport?
Measure your vehicles and allow for doors opening, walking past, mirrors, roof racks and the route in from the driveway. Post spacing and clear headroom matter as well as roof dimensions. Bring the largest vehicle you expect to use and any future storage needs into the brief.
Can you install a carport kit that I buy?
Send the model, complete supplier instructions and design documentation before purchasing where possible. We check the site, foundation requirements, parts and installation scope. A kit’s advertised size or engineering document does not by itself resolve its suitability for your property.
Sources and further reading
- MBIE: carports up to 20 m²
- MBIE: 20–40 m² LBP pathway
- MBIE: 20–40 m² engineer pathway
- MBIE: planning, drainage and measuring carports
General planning guidance, checked 16 November 2026. Confirm the requirements, inspection scope and professional advice for your property before committing to work.
Check the site before choosing the carport
Bring vehicle measurements, a rough location and any supplier information to the $75 including GST planning visit. We can define the installation scope and the next design steps. The paid visit is credited once to the same job if you proceed before your quote expires.